Zirconia Cera Foam DMX Powder is a ready-to-use, powdered refractory mixture to which water is added to form a slurry. The slurry can then be poured/cast into silicone or metal molds to form free-standing ceramic foam pieces; or, the slurry can be applied by...
Cera Foam provides a ready-to-use, water-based refractory coating that can be applied onto ceramic materials. Due to “chemical direct foaming” Cera Foam expands to 2.5x its size to form adherent, porous, black foam when first heated up to 700 C. Use Cera Foam where the properties of foam are desired: highly porous thermal insulation, sealing deteriorated surfaces, filling pock-marks/holes/gaps, helping to bond parts with spaces between them, etc. Cera Foam is engineered to expand to fill damaged areas and does not sinter, shrink or crack with use. Cera Foam adheres well to all refractory substrates, dense or porous. Cera Foam only requires a one-time heat-up to foam-in-place and then is usable in all environments to 800 C (1472 F). Ready-to-use by applying onto the area where foam is desired, drying, and then with a first-time heat-up the foam is formed in place.
Zirconia Cera Foam DMX Powder is a ready-to-use, powdered refractory mixture for casting/drying/firing to make free-standing ceramic foam pieces usable to over 1600 C. A highly-porous Zirconia results.
Cera Foam® Our water-based, paintable coating with “chemical direct foaming” expands to 2.5 times its size to form adherent, porous, black foam when first heated up to 700 C. Cera Foam provides highly porous thermal insulation as well as sealing/filling holes and gaps...
Molten Metal ProcessingHot-Top Billet Casting Table (Wagstaff), Troughs, Launders, Filer Boxes, Runners: BN Lubricoat (Blue or White versions) or BN Lubricoat Blue Spray “Used” Casting Tables with Bone Ash residual: Z-Primercoat as surface sealant, top-coated...
BindersZYP Coatings’ binders allow users to experiment and create their own specialty coating by merely adding powder.Both solvent-based and water-based binders are offered. See the .pdf below for a detailed comparison table:Paint Binder that Allows Researchers to...
Surface Sealants These sealants are used to seal in dust/fibers/contamination on ceramics. Rigidizer that Seals in Surface Dust on Refractories While Providing a Refractory SurfaceToughseal is a water-alcohol-based liquid which can be applied by bristle-brush,...
Paint Application Guide For all coatings, always re-suspend the coating before use. If diluting, make sure the paint is uniformly diluted. For any method, make sure that the substrate is cleaned from any oils or surface dust: painting onto dust is like painting over...
