Maskote Zinc Stop-Off

Maskote Zinc Stop-Off is one of our best and fastest selling coatings. Here it is ready to ship our in 5 gallon containers. This coating is a specially formulated solvent-based paint that withstands normal alkaline and acid-cleaning operations before galvanizing and then, with galvanizing, masks off the coated areas and prevents zinc-steel alloying.

Read more about Maskote Zinc Stop-Off

 

BN Releasecoat Blue

Another coating that you will cause you to “Think Blue, Think ZYP”.  BN Releasecoat-Blue is a relatively-soft, washcoat-type of coating with a lower BN content which still provides excellent nonwetting and release with aluminum, magnesium, zinc and other nonferrous metals and alloys.

 

Read more about Boron Nitride Releasecoat-Blue

 

How to color a mold

One half of this mold was painted with blue food color so that the Glass Release Spray or the ZYP Aerosol can be seen. You will be able to see how thick and where you are covering the mold. The blue color will burn away and the mold will be white again. Do not mix food color with the water-soluble Glass Release Spray. The food color contains propylene glycol which will change the consistency of the liquid, making the sprayer clog. Here is a video on how to spay the mold and use food color to help you judge how much and where you are spraying: https://www.youtube.com/watch?v=EznRf6Oa_X0

 

Read more about ZYP Aerosol Lubricoat
Read more about BN Glass Release
Link to  PDF  for Special Information
See Video on painting mold with food color

 

Glass Release Improvements

BN Glass Release has some new upgrades. A mixing ball has been added to re-suspend the liquid. Just shake until you hear the ball and there is no sediment. The sprayer is shipped separately with the capped bottle. Always save the cap to reuse. Clean the sprayer after use by placing it in a cup of water and pumping water through it until it is cleared of Glass Release. This takes a little more work than our aerosol, but can be shipped anywhere in the world at a lower cost.

 

Read more on the Product Page
Link to  PDF  for Special Information

 

 

Dental Cast Release

Dental Cast Release Is new for the dental Industry. It provides a water-based paint that can be used to apply a thin Boron Nitride (BN) layer onto typical ceramic crucibles used for vacuum melting and casting of specialty alloys such as “high fusing gold”, cobalt-chrome, nickel-chrome, and other non-precious metal alloys used for crowns or bridges. The finger-pump sprayer with “easy to see” blue paint makes application easy.

Dental Cast Release

 

Read more on the Product Page
Link to  PDF of Datasheet for Dental Cast Release
Link to  PDF  for Dental Cast Release Helpful Information