BN Hardcoat-CM

Boron Nitride Hardcoat® CM is the same “fired” constituency as our original tough, abrasion-resistant boron nitride coating.  The CM formulation maintains the same performance as the original but contains NO acrylics making it safer to use. BN Hardcoat CM is non-wetting with molten aluminum, magnesium, zinc and other non-ferrous metals and their drosses. Ideal for high-wear uses where all other boron nitride coatings fail. Can be applied to cold or hot substrates whereas the original BN Hardcoat should only be applied and dried at room temperature.

Key Attributes
  • Minimal Outgassing (Mostly H2O) on Heatup
  • Contains NO Acrylics
  • Same “Fired” Constituency as “regular” BN Hardcoat
  • Non-Corrosive to Mild Steel & Cast Iron
  • Alkaline/Basic-pH Formula
  • Non-Wetted by Molten Aluminum, Magnesium, Zinc and their Drosses
  • Applied Like House paint
  • Safe, Water-Based, No VOCs
Ideal Use
  • Immersion Tubes
  • Metal Troughs, Molds
  • Ladles, Skimmers
  • Dross Buggies
  • Shot Screens
  • Stalk Tubes
  • Funnels

 Link to PDF datasheet: BN Hardcoat-CM