BN Releasecoat-PM
Description

BN Releasecoat-PM is a concentrated paint that is fully-loaded with Boron Nitride.  PM provides a thick, dilutable paint in a paste-like consistency, which can be modified by simply adding water.  Given this concentrated form, PM saves on shipping costs. Typical dilution is 2 parts water to 1 part concentrate. When diluted PM is a relatively-soft, washcoat-type of coating.

BN Releasecoat-PM provides excellent nonwetting and release with aluminum, magnesium, zinc and other nonferrous metals and alloys.

Key Attributes
  • Perfect for top coating over thermal insulating coatings.
  • Provides “cosmetic”/mirror-like surface finish with excellent mold release
  • Ideal for low-draft, high-drag regions for wheel casting
  • Easily applied by air spraying on to hot or cold molds
  • Safe, water-based
Ideal Use
  • Permanent Molds
  • Low Pressure or Gravity Die casting
Datasheet

Link to PDF datasheet: BN-Releasecoat-PM

  • BN Releasecoat-PM
  • 4 gallon case
  • $776.00 ($194.00/gal) for 1
    $732.00 ($180.00/gal) for 2-5
    $688.00 ($172.00/gal) for 6+

Note: If you have used the now-discontinued BN Releasecoat-25 in the past, this can be used as a direct replacement. PM has the same concentration of BN with less water content. The binder/suspender in PM is adjusted such that the diluted paint will adhere better than the diluted Releasecoat-25.