|
Go to Archived Topics
We have added more information about our products in the General Information Section. If you are new to coatings there is a tutorial and a page explaining the Miracle of BN Coatings. You may want to start with the Paint Selection Guide.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Dry Film Lubricants has been added to our website.
Dry film lubricant (DFL) coatings of Boron Nitride and Super Enhanced Graphite (SEG) were developed by ZYP Coatings, Inc. in order to provide ready-to-use aerosol formulations that give superior performance in lubrication.
A dry film lubricant is a fine-particle mixture of a lubricating material and binders. With our aerosol-can formulations, after merely spraying onto a surface and drying (which takes only a minute or so), the lubricant is attached to the surface and reduces friction while increasing wear-lifetime -- operating from low-temperature up to very-high temperatures [cryogenic up to 1000 C].
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
The Blackbody/High-Emmisvity coatings have a new addition -- TBBC-CE, a water-based Cerium Oxide coating usable mostly from 1100 C to 1600 C.
Each of the primary materials used in our coatings [Aluminum Oxide, Boron Nitride, Titanium Nitride, Yttrium Oxide, and Zirconium Oxide] has been given a webpage-link "What Makes xxxxxx Unique" about the material and a webpage-link with the "Properties and Compatibility Data" for the material.
A "Compatibility Guide" now enables one to see what reacts with what and what doesn't ... when selecting a coating for specific areas-of-interest.
Specific coating-use examples for molten nonferrous metal areas-of-use are given at the General Information webpage -- which can show someone immediately what coating is typically used for their problem area.
A new addition at Substrates is Substrates-Fibrous, which refers to fiber-blanket insulation. Coatings and/or rigidizers for these are discussed.
Coatings considered by Carrier/Vehicle at General Information shows our three coating types -- water-based (the primary ones), solvent-based, and oil-based [where the coating TPC-LL is described].
ZYP Coatings, Inc;
120 Valley Court
Oak Ridge, Tennessee 37930
Phone: 865-482-5717
FAX 865-482-1281
Email: info@zypcoatings.com
|
