ZYP for Ladles and Skimmers

Products General Information Search Contact Us View Cart Home

For Ladles and Skimmers
Teflon®-like Non-stick Release Coating The Absolute Best with Molten ALUMINUM, MAGNESIUM, & ZINC
	BORON NITRIDE HARDCOAT^TM
	Unique Abrasion-Resistant Boron Nitride Formulation
	SAVES TIME – – – COATING LASTS 7 TIMES LONGER Recoat ladles only once every 1 to 2 weeks rather than every 1 to 2 days. SAVES MONEY – – – USE ONLY A FRACTION (1/20th) OF THE USUAL QUANTITY OF COATING. Less expensive to use! Use only 1 gallon of HARDCOAT^TM rather than 20 gallons of a "so-called low-cost" coating AND get Teflon®-like release with no buildup! USER FRIENDLY – – – Apply one coat by brush -- just like ordinary house paint. Dry and place into use. Safe, non-toxic, and water-based.


	WHAT OUR CUSTOMERS SAY • • •	DIE CASTING • "VERY easy to apply ... only one coat needed." •"Clean pour -- no dross buld-up." INVESTMENT CASTING • "Only have to use one gallon of HARDCOAT per month ... was using 20 gallons of clay-water mix." PERMANENT MOLD CASTING • "Truly acts like Teflon®!" • "Our operators no longer have to bang the ladles on the floor to remove the metal." • "Good abrasion resistance and long life." SAND CASTING • "Only have to coat once every two weeks versus twice per day." • Also works with our copper alloys."

	These recommendations are believed to be accurate. No guarantee of their accuracy is made and the products are sold without warranty, expressed or implied. Purchasers shall make their own tests to determine suitability of their use. Teflon®--Registered trademark of DuPont