Products         General Information         Search         Contact Us         View Cart        Home
 
 

.

 

Zirconium Oxide Coatings

Technical Information - What Makes Zirconium Oxide Unique?
What are the Properties and Compatibility Data?
Consult the Painting Instruction Guide or Air Spray Tips before Using Coatings

Zirconium Oxide (or Zirconia) coatings are very stable with many materials at high temperatures.  They contain no silicon oxide (silica) and sometimes can be used instead of Yttrium Oxide coatings.  A complete selection of water-based and non-aqueous coatings are offered in industrial and R&D purity levels

Z Aerosol
Zirconia based, cream colored aerosol spray with an alcohol/acetone binder system.  Resistance to molten metal, electrical insulation, thermal insulation

     More Info                $97.00 /can

Z Aerosol Brushable
Zirconia based, cream colored  with an alcohol/acetone binder system, but in bulk (paint) form, sold by the gallon.  Resistance to molten metal, electrical insulation, thermal insulation

     More Info                $317.00 /gallon

Type Z
Zirconia water-based paintable coating, R&D purity level.  Very stable with many materials at high temperatures.

     Additional information and pricing not available online, please contact us directly

ZO
The coating is ideal for forming a high-purity, highly chemically-resistant zirconia coating on ceramics, but is also usable on metal and graphite bodies. Maximum recommended use temperature is 2000 C in all use-atmospheres.

     More Info            $225.00 /gallon

ZO Mod
This is a moderately-low viscosity, alumina-enhanced phosphate-bonded, water-based, calcium oxide-stabilized [4%] zirconium oxide coating. Type ZO-MOD is readily absorbed by porous and fibrous ceramic bodies to harden and rigidize the surface while providing a hard, highly chemically resistant protective layer.

     More Info            $296.00 /gallon

Z-Guard
Produces a hard, abrasion and chemical resistant zirconia (ZrO2) coating that is protective to all ceramic bodies against most molten metals and corrosive environments to above 3200 F (1800 C). Z-GUARD may be applied to soft or fibrous structures with no special rigidizer to produce a more wear resistant surface layer which is also resistant to most high temperature reactions which may degrade the ceramic.

      More Info           $194.00 /gallon

Zircwash
Paintable Zirconium Oxide coating; silica free, gives high purity ferrous and/or non-ferrous castings, utility to 1900 C.

     More Info            $199.00 /gallon
                            Zirwash 5 gallon    $886.00/ 5-gallons

 

             All Rights Reserved       ZYP Coatings, Inc.