|
AEROSOL REFRACTORY PAINTS
See our Separate Page
for all Aerosol Refractory Paints
BORON NITRIDE COATINGS
BN Hardcoat®
BORON NITRIDE HARDCOAT® is the original abrasion-resistant boron nitride coating. BN-HARDCOAT®, which is applied exactly like house paint, provides a surface that acts like Teflon® in that molten aluminum, magnesium and their drosses will not react nor adhere. Ideal for high-wear uses where all other boron nitride coatings fail.
More Info
$174.00 /gallon
BN Lubricoat®
BORON NITRIDE LUBRICOAT® is a proven lubricant and release agent for high-temperature use where graphite and similar products fail. Boron Nitride Lubricoat® is ideal for superplastic forming, forging and extrusion operations as well as for providing a non-stick coating for the glass and non-ferrous melting/casting industries.
More Info
$174.00 /gallon
BN Lubricoat® ZV
Relatively hard, highly dilutable coating provides
non-wetting with molten non-ferrous metals.
More Info
$204.00 /gallon
BN Releasecoat®
A high quality white pre-diluted BN
formulation primarily used with permanent mold castings.
When applied in low draft, high drag regions over the normally
used insulating mold coatings (BN RELEASECOAT® is compatible with all), BN RELEASECOAT®
provides unexcelled mold release and mirror-like cosmetic
surface finish.
More Info
$62.00 /gallon
BN Releasecoat®-PM
BORON NITRIDE RELEASECOAT®-PM provides TEFLON®-LlKE release for low draft-high drag regions of permanent moulds. The RELEASECOAT®-PM is provided as a paste concentrate to reduce shipping costs. To use, dilute 2 parts water to 1 part paint by volume. Simply air-spray a thin layer of paint in the areas needing extra release over your regularly used mould coating (which provides the necessary insulating properties). Reapply as needed. RELEASECOAT®-PM
is compatible with all commercial mould coatings and can be
sprayed onto hot or cold moulds.
More Info
$174.00 /gallon
BORON NITRIDE PASTES
BNA Paste
BNA is a non-aqueous-based
paste usable in all atmospheres and can be applied like ordinary
house paint. Yields over 95% BN after drying.
More Info
$375.00 /gallon
BN Lubricoat Paste
When thick layers are required, economical Boron Nitride Lubricoat® PASTE is offered -- ready-to-use as is, with no mixing; or, if desired, easily dilutable with water.
More Info
$179.00 /gallon
BN Ring Seal
BN RING SEAL is a superior water-based paste for sealing the
join between the transition plate and the graphite ring during
assembly of Wagstaff billet casters.
More Info
$174.00 /gallon
BNW Paste
BNW is a neutral pH, specially formulated paste that when brushed onto metal, ceramic or graphite like ordinary housepaint will produce a coating that is totally non-wetted by molten aluminum, magnesium and their drosses – providing a NO-STICK surface.
More Info
$174.00 /gallon
COATINGS for CODING &
MARKING
For coding / marking to over 2000 F (1100 C).
Adherent to
metals and ceramics with thermal cycles. Hard, Abrasion-Resistant.
High-temperature stable. Does not glaze, melt, run, become tacky or chalk off.
Water-based, like house paint
Codemarks are water-based paints that work on metal substrates from 1650 F [white paint] to over 2000 F [black paint] and on most all ceramic substrates to over 2000 F. These coatings can be applied to all substrates by most any painting technique.
Codemark Black
$250.00 /gallon
Codemark White
$205.00 /gallon More Info
LK Ink is a ready-to-use, water-based, totally inorganic white ink/coating that, just on drying, forms a water-resistant, tough and abrasion-resistant coating/marking on all substrates. The LK Ink is a thin milk-like consistency -- ideal for painting/ coding / marking / identification to over 800 C (over 1475 F) on metal or ceramic substrates. Can even be used on thin, flexible metal sheets.
LK Ink
$150.00 /gallon
More Info 5-gallon pail
$675.00 (or $135.00/gallon)
ADDITIONAL COATINGS
Y
This water-based paint is a water-based suspension of 99.99% pure Yttrium Oxide, the most thermodynamically stable oxide available. Whenever metal purity is a prime consideration during melting and casting operations, yttria
can be considered the most chemically resistant material
available. Type Y usage is limited to 1500 C with
carbon in a vacuum and is not recommend for usage in air.
More Info Call for current price ... this paint is not available online due to the present unstable/fluctuating prices for Rare Earth Oxides.
YK Paint
This is a low viscosity, non-aqueous-based, yttrium oxide coating. Type YK readily penetrates porous and fibrous ceramic bodies. Compared to Type Y, the Type YK coating is somewhat softer and higher purity after outgassing [with Type YK containing only 0.3% glassy-carbon phase after heating] and also outgasses at a lower temperature of only 350 C – ideal for coating molds where minimum outgassing
temperatures and amounts of volatiles are desired. Type YK
is not recommended for usage in air.
More Info
Call for current price ... this paint is not available online due to the present unstable/fluctuating prices for Rare Earth Oxides.
Zircwash
Paintable Zirconium Oxide coating; silica free, gives high purity
non-ferrous castings, utility to 1900 C.
More Info $199.00 /gallon
 $886.00/ 5-gallons
|
