|
Y Aerosol Brushable
ZYP Coatings’ Yttrium Oxide Aerosol can is used for easy application of a non-aqueous, fast-drying coating. However, for larger-scale needs, often needing application by brushing or traditional air-spraying means, an aerosol can is limiting. Therefore, Y-AEROSOL-BRUSHABLE is offered as the same formulation that is used in our aerosol can but in BULK (paint) form, sold by the gallon. As with the aerosol can, the yttrium oxide coating that results is often ideal where water-based coatings are not desired. Also, the Y-AEROSOL-BRUSHABLE formulation can be used in any environment (air as well as inert or vacuum) to 1900 C. Coatings have low-to-medium hardness and are over 97% Yttrium Oxide. Note: coatings tend to “gray-out” during first heating to 400-800 C due to the binder; the normal white coloring will typically re-appear at >800 C. Ideal for all substrates – metals, ceramics, graphite/carbon. For more technical information see the Aerosol Datasheet
|
|
