|
|
NDB Stop-Off
THE ONE-FORMULATION
"DO ALL"STOP-OFF COATING for ALL HEAT TREATING PROCESSES
|
|
• fluidized bed nitriding
• vacuum, gas & pack carburizing
• salt bath treatment
• carbonitriding
• scale & decarburization control
|
|
|
|
|
|
 |
|
|
CHARACTERISTICS
|
|
|
|
|
• 100% effective for all processes and
metals and most all case thicknesses
• Water-based, safe and easy-to-use
• Paintable like housepaint
• Abrasion-resistant, hard coating
• Easy tool cleanup with water
• Easily removed after processing
• Applicable even for alloy steels, such
as the 8000 series (i.e.,8160) |
|
|
NDB Stop-off coating is a "Do All" coating for heat treating, being effective for all nitriding, carburizing, and carbonitriding atmospheres. NDB is a safe, easy-to-use water-based 100% inorganic ceramic formulation that provides a hard, abrasion resistant barrier layer on all metals. NDB is proven effective for fluidized bed processing where abrasion resistance is mandatory, but can also be used in conventional furnaces. Apply like ordinary housepaint by brushing, spraying or dipping. Remove residues after use by using steel brush, bead-grit blasting or other mechanical means. There are no environmemtal and flammability problems like those of solvent-based stop-offs.
|
|
|
USE NOTES
|
|
PRICES
|
|
|
|
|
|
|
|
• Treat like ordinary housepaint.
• Resuspend the coating.
• Clean the surface of oils, scale, etc.
• Apply 2 to 3 coatings by brush or air spray.
• Allow to thoroughly dry below 170 F.
• Place into use up to 2000 F. |
|
|
LOWEST COST
1 Gallon...........$75 
|
|
| Email to a Friend |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
