|
|
|
|
|
Boron Nitride Releasecoat PM
Permanent Moulds/Low Pressure Die Casting
Superior Release for Low-Draft High-Drag Regions
|
|
BORON NITRIDE RELEASECOAT-PM
|
|
|
 |
|
|
|
|
BORON NITRIDE RELEASECOAT-PM provides TEFLON®-LlKE release for low draft-high drag regions of permanent moulds. The RELEASECOAT-PM is provided as a paste concentrate to reduce shipping costs. To use, dilute 2 parts water to 1 part paint by volume. Simply air-spray a thin layer of paint in the areas needing extra release over your regularly used mould coating (which provides the necessary insulating properties). Reapply as needed. RELEASECOAT-PM is compatible with all commercial mould coatings and can be sprayed onto hot or cold moulds.
BORON NITRIDE RELEASECOAT-PM gives off no fumes, organics, smoke or gases (other than water vapor). The paint is safe, non-flammable and easy-to-use just like ordinary housepaint. |
|
|
PRODUCT SPECIFICATIONS
|
|
PERMANENT MOLD CASTING
Superior Release For Low-Draft
High-Drag Regions
• Acts LikeTeflon®
With molten aluminium,
magnesium, and zinc.
• For Extra Release
Simply apply over your regular mold
coating, hot or cold.
• Easy-To-Use
Just like ordinary housepaint.
Water-based and non-flammable.
|
|
|
|
|
Active Ingredient...................................................................BN
Max Use Temperature (C).........................................1100 Air
......................................................................................1400 Vac
.....................................................................................1800 Inert
Use Atmosphere....................................................................All
Fired Composition.......................................................92% BN
Liquid Carrier....................................................................Water
Percent Carrier.......................................................................75
Percent Active Ingredient......................................................25
Brookfield Viscosity (cps)......................................1000-1100
Specific Gravity (g/cm3).....................................................1.09
Color...................................................................................White
Shelf Life (months)..............................................................>12
Coverage (m2/l) After Dilution................................approx.30
Coating pH.................................................................................7
Email to a Friend
|
|
|
PRICES
|
|
|
$170.00......1 gallon  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
