• CORROSION RESISTANT -- Totally Protects .Surfaces from Molten Aluminum, Magnesium, Zinc and Their Drosses

• NONWETTING -- Acts Like Teflon® to Molten Metal

• Protects Ceramics, Metals and Graphite

• Hard Surface Lasts Longer and Reduces .Maintenance, Increasing Operator Satisfaction

• Readily Dilutable to Any Level

• Applies Like Ordinary Housepaint

• Safe, Water-Based

• The paint can be used full strength or diluted as desired with water. A common dilution is two parts water to one part paint -- excellent for coating metals or ceramics.

• Dipping, air-spraying, or brushing can be used to attain thicknesses of up to 0.01" (10 mils).

• Dry thoroughly and place into use. The BN LUBRICOAT®-ZV is relatively hard after drying. Dry coating can be polished with soft cloth/towel.

Powder Constituent.......................... BoroNitride(BN)
>99% Purity

Binder Phase.................................... Magnesium Silicate

Ready-to-Use Composition
.......Percentage Solids......................30-45%
.......Percentage Liquid Phase............55-70%

Liquid Carrier..................................... Water

pH ......................................................>7.5
Brookfield Viscosity (cps)................. 850-1300
Specific Gravity ................................1.20
Coverage ..........................................100-400 ft²
Shelf Life........................................... >1 year
Color, unless specified blue.............. White,

Use Temperature:
Reducing/Inert/Vacuum.....................1400 C (2550 F) Air.......................................................1000 C (1800 F)

Substrate Use Graphite, Metals, Ceramics, etc.

BN LUBRICOAT®-ZV is formulated to allow dilution without degrading performance, and is often used for dipping parts and to form a relatively hard coating just on drying. Thus, BN LUBRICOAT®-ZV is typically selected for applications that require a harder surface (i.e., components that move while in contact with molten metal).

Email to a Friend

These recommendations are believed to be accurate. No guarantee of their accuracy is made and the products are sold without warranty, expressed or implied. Purchasers shall make their own tests to determine suitability of their use.