ZYP BN Lubricoat Blue

Products General Information Search Contact Us View Cart Home

Boron Nitride Lubricoat^® and Boron Nitride Lubricoat-Blue^®

KEY ATTRIBUTES

• Totally Non-Wetted by Molten Aluminum, Magnesium, and Their Drosses

• Acts Like Teflon® to Molten Metal

• Protects Ceramics, Metals and Graphite

• Maintenance is Reduced and Operator Satisfaction Maximized

• Applied Like House paint

• Safe, Water-Based, No VOC's

OUR BEST, ALL-PURPOSE,"TOP-OF-THE-LINE" COATING CONCENTRATE

IDEAL USE

SPECIFICATIONS

USE NOTES

• Launders & Runners
• Auto-Pour Ladles
• Troughs & Tubes
• Funnels & Spouts
• Filter Bowls, Boxes
• Caster Tips
• Dross Press Heads

Active Ingredient ..........................................BN
Max Use Temperature....Air 1800 F / 1000 C
..........................................Vac 2550 F / 1400 C
.........................................Inert 3300 F / 1800 C
Use Atmosphere.......................................... All
Fired Composition.........................85-90% BN
..........................................................15% Al₂O₃
Liquid Carrier.......................................... Water
Binder Phase...........................................AI₂O₃
Percent Carrier .............................................75
Percent Active Ingredient ............................25
Brookfield Viscosity (cp..........900-1200 3/60
Specific Gravity (g/cm3)........................... 1.12
Color ......White, except when specified blue
Shelf Life (months) ...................................>12
Coverage (ft2/gal) ......................................400
Coating pH................................................... 2-4
H F R Ratings ..........................................1-0-0
Substrate Use............................................... All

1. Resuspend if needed.
2. Clean surfaces to be painted     of oils dirt, scale etc.
3. Apply one thin layer by brush     or spray like ordinary house     paint.
4. Allow to dry at room     temperature before use.

PRICES

OTHER USE AREAS

BN Lubricoat (white)
1 Gallon........170.00

BN Lubricoat-Blue^TM (blue paint)
1 Gallon........175.00

BN Lubricoat Paste
1 Gallon........175.00

Email to a Friend

1. High Wear/Erosion Areas
refer to Boron Nitride Hardcoat

2. Permanent Mold/Low Pressure Die Casting
refer to Releasecoat

Coating comes as a standard white paint; blue paint is available for better visibility; white paste is also available for uses where a thick version is needed. These coatings are also available in a 5-gallon pail upon request. Standard package is a wide-mouth 1-gallon pail. Please specify when ordering.

CAUTION: DO NOT CONTACT WET COATINGS WITH MOLTEN METAL.

These recommendations are believed to be accurate. No guarantee of their accuracy is made and the products are sold without warranty, expressed or implied. Purchasers shall make their own tests to determine suitability of their use.