ZYP Coatings, Inc.

Boron Nitride Hardcoat ^®

Unique Abrasion-Resistant Formulation

Key Attributes

• Totally Protects and Makes All Surfaces Non-Wetted by Molten Aluminum, Magnesium and Their Drosses

• Truly Abrasion-Resistant

• Easily Applied Like Housepaint to Metals, Ceramics and Graphite

• Water-Based, Ready-to-Use. No VOC’s

BORON NITRIDE HARDCOAT® is the original truly abrasion-resistant boron nitride coating. BN-HARDCOAT®, which is applied exactly like housepaint, provides a surface that acts like Teflon® in that molten aluminum, magnesium and their drosses will not react nor adhere. Ideal for high-wear uses where all other boron nitride coatings fail. Inqure about Hardcoat-CM if an 'alternative' coating is required for some reason.

These recommendations are believed to be accurate. No guarantee of their accuracy is made and the products are sold without warranty, expressed or implied. Purchasers shall make their own tests to determine suitability of their use.

1. DO NOT DILUTE.

2. Resuspend the paint.

3. Clean surface of oils, dirt, scale etc.

4. Apply 2 to 3 thin layers by brush or spray.

5. Allow to thoroughly dry between coats and before use.

Recommended Uses

• Immersion Tubes
• Metal Troughs, Molds
• Ladles, Skimmers
• Dross Buggies
• Shot Screens
• Stalk Tubes
• Funnels

Price

1 gallon ............ $174

Email to a Friend

SAFETY INFORMATION:
Consult MSDS before use. Avoid breathing of spray/vapors.

CAUTION: DO NOT CONTACT WET COATINGS WITH MOLTEN METAL.

Use Instructions